The Zero VOC Solution for
Wood Floors

BioShield High Solid Floor Oil is a solvent-free finish for wood surfaces. Made from natural raw materials, the product supports the mechanical and chemical-resistance of wood surfaces.

Application Range: Use as a protective, wood enhancing finish on wood floors and cork flooring. For interior use only.

Technical Qualities: The product enhances the look and feel of natural wood and dries to a satin-matte sheen. This water-resistant floor and furniture finish is also suitable for kitchens and bathrooms.

Ingredients: Linseed Oil, Tung Oil, Linseed Stand Oil, Silicic Acid, Beeswax, Candelilla wax, Lead-Free Dryers (Zircon Octoat, Cobalt Octoat).

Color: Clear to slightly amber colored.

General Surface Requirements: Surface must be firm, dry, absorbent, clean, free of grease, dust, and other loose particles. Light sanding (max. 100 grit) before application is recommended.

Method of Application:  Product may be applied with a trowel or spatula for best penetration.  Otherwise use brush and abrasive pad (in direction of the wood grain) or a machine applicator such as a floor buffer.  All product must be absorbed by the surface and and must be wiped within 30 minutes of application with a lint-free cloth. Finish surface with 1-2 coats of BioShield Wax Finish #39.

Drying Time: After drying for approximately 12-24 hours depending on climate, temperature, humidity, and absorbency of surface, an additional coat may be applied.

Coverage: 200-300 square feet per liter, depending on absorbency of surface.